Muramasa Katana Iaito with replica of the original Sanada Yukimura Koshirae!

970.00 €

Delivery time: 2-3 working days

Nicht vorrätig

Iaito lengths and Hamon selection

What is the right length for my Iaito?

Both a centreboard that is too short and one that is too long will hinder or prevent correct movements. We therefore recommend the following sword lengths as the maximum length.

Experience has shown that a size smaller is optimal for most people, as the table is designed for more advanced exercisers, for whom the pulling movement is slightly different than for less advanced users.

There is an extra column in the table for women. As the belt is traditionally worn higher on women than on men, it makes sense to use a different sword length.

The recommended measurement corresponds to the Japanese way of measuring. This means nagasa from munemachi (edge of the blade on the habaki) to the end of the tip.

In addition to our recommendation, there are also differences in the individual styles. That's why we always recommend asking your local sensei. As you can see, the optimum length can be a very individual issue. However, the table should help with orientation.

Body size Nagasa for men Nagasa for women Nagasa for novices
155 cm 2.35 Shaku (71.2cm) 2.25 Shaku (68.2cm) 1 small each
160 cm 2.40 Shaku (72.7cm) 2.30 Shaku (69.7cm) 1 small each
165 cm 2.45 Shaku (74.2cm) 2.35 Shaku (71.2cm) 1 small each
170 cm 2.50 Shaku (75.8cm) 2.40 Shaku (72.7cm) 1 small each
175 cm 2.55 Shaku (77.3cm) 2.45 Shaku (74.2cm) 1 small each
180 cm 2.60 Shaku (78.8cm) 2.50 Shaku (75.8cm) 1 small each
185 cm 2.65 Shaku (80.3cm) 2.55 Shaku (77.3cm) 1 small each
190 cm 2.70 Shaku (81.8cm) 2.60 Shaku (78.8cm) 1 small each

What do the Hamon names mean?

Brief explanation of the hamon variations you can choose from. Not all hamon are available for all swords. You can see the selection for the sword on the respective product page.

Suguha

A straight line. The most common pattern because the straight line goes well with the straightness of the samurai.

Notaries

Large waves. Another popular motif because the large waves create a very calm pattern.

Midare

A pattern with uneven, short waves and points.

Gunome

Relatively even short waves.

Doran

A more or less uneven pattern of larger waves and indentations.

Doran double line

The Doran pattern in a special version with two lines combined with each other. It looks much more sophisticated than the simple version. However, the realisation is also comparatively complex.

Product features:
- Muramasa was known for his cursed blades
- A replica of his sword Yoto Muramasa
- The original was owned by the famous samurai Sanada Yukimura
- Blade length and handle length freely selectable
- Made in Japan

Product description:
The Japanese swordsmith Muramasa is regarded as the master of cursed blades and has thus secured himself a permanent place in the history of the Japanese sword.

The background to this fact is an incident that took place around the beginning of the Edo period. Muramasa's blades were popular with the samurai at the time. Also among the followers of the aspiring daimyo Tokugawa Ieyasu, who would later become known as the third unifier of the Japanese empire and the first shogun of the Tokugawa dynasty.

Over the years, there have been numerous mysterious and unexplained incidents in which members of the Tokugawa family have been injured or killed by Muramasa blades.

To put a stop to this phenomenon, Tokugawa Ieyasu banned the blades of Muramasa for his followers. This naturally made the blades all the more popular with the Tokugawa family's opponents, as they had a reputation for being thirsty for blood, especially the blood of the Tokugawa.

One of these opponents was the talented samurai and tactician Sanada Yukimura. This sword is a replica of his Yoto Muramasa, which, according to legend, he wielded in the famous Battle of Sekigahara at the beginning of the 17th century.

The mounting consists of a black scabbard with red and white kikko sageo. The hilt is bound with a band of red suede on a black seed.

As it is a training sword, it has a blunt zinc-aluminium blade with a special, artificially created hamon pattern.

We normally offer extensive customisation options in this price range. As the original look of this sword is to be retained, we ask for your understanding that only the blade length and the handle length can be customised.

This sword is a high-quality replica of a sword from a legendary blacksmith that belonged to a special samurai and was used at one of the most historic times in Japan. All this as a sword that can be used in daily training.

ATTENTION: According to German law, the purchase of this item is only permitted for persons of legal age. We check the age of every buyer!
Please ensure that the deposited recipient accepts the delivery in person and can prove his or her age with an identity card. The age and identity will be checked by the delivery service upon handover.
Please note that orders without proof of age will not be handed over!
Due to the special handling of this item, delivery abroad, to packing stations or parcel acceptance points is unfortunately not possible.

This product originates from Japan. As there must be a contact person within the EU for safety issues under current EU law, we offer it under our EU brand in order to fulfil the requirements. To this end, it is produced specifically for us in Japan and appropriate conditions are created so that we can offer it on the EU market in compliance with the law.
A manufacturer in Germany is therefore named.

Manufacturer within the meaning of EU law: Toshiro Swords, Andara GmbH, Brunnenweg 15, 64331 Weiterstadt, Germany, info@andara-gmbh.de

Reviews

There are no reviews yet.

Be the first to review “Muramasa Katana Iaito mit Nachbildung der original Sanada Yukimura Koshirae!”

Your email address will not be published. Required fields are marked *

Product Enquiry